The Brivis Promina™ incorporates functional technology including an AutoRefresh water management system which controls the amount of fresh water added to the unit. Once a pre-determined number of fill cycles have been completed, the cooler will automatically flush the entire tank and refill it with clean, fresh water. When cooling is no longer required, the system will automatically run the FreshStart operation removing stagnant water and sediment before starting up again.
Locate Your Nearest Store
Low profile sloping base
WinterSeal available to prevent heat escaping in winter
Super quiet axial fan
Available in three colours: Charcoal, Terra Red & Beige
In the Brivis Promina, the AutoRefresh water management system controls the amount of fresh water added to the system. Once a pre-determined number of fill cycles have been completed the cooler will automatically flush the entire tank and refill it with clean, fresh water. While the water is being refreshed the cooler continues to operate, unlike coolers that use a continuous bleed or dump and fill cycle to refresh the tank water. When cooling is no longer required the Brivis Promina will automatically run the FreshStart operation which means there is no stagnant water or sediment sitting in the cooler before it starts up again – reducing the need for seasonal maintenance.
|Model||Motor (W)||Fan Blade/Type||Pad Area Size||Pad Thickness (mm)||Length (mm)||Width (mm)||Height Front||Height Back||Dry Weight|
|P76||1000||11 / HP†||Standard||130||1100||1100||720||400||51|